Figure 21: Status - Motorola Canopy 300 Mbps Backhaul User Manual

Figure 21: Status Page
The following section details all the attributes displayed on the status page:
Link Name The link name is allocated by the system administrator and is used to identify the
equipment on the network. The link name attribute is limited to a maximum size of 63 ASCII
characters.
Link Location The link location is allocated by the system administrator and can be used as
a generic scratch pad to describe the location of the equipment or any other equipment
related notes. The link location attribute is limited to a maximum size of 63 ASCII characters.
Software Version The attribute describes the version of software installed on the equipment.
The format of the attributes is PPPP-XX-YY where PPPP is the product variant, XX is the
major release version and YY is the minor release version.
Hardware Version The hardware version attribute contains all the combined hardware
version information. The attribute is formatted as DXX. RYY Z where DXX contain the version
of the digital card, RYY contains the version of the RF (radio frequency) card and Z describes
the antenna type which can be I (integrated) or C (connectorized). Region Code The region
code is used by the system to constrain the wireless to operate within the 5.8 GHz regulatory
regime of the particular country. The region code is encoded in the product license key. If the
operator wishes to change region code, a new license key must be obtained from Motorola or
the local distributor / system integrator.
Elapsed Time Indicator The elapsed time indicator attribute presents the total time in years,
days, hours, minutes and seconds since the last system restart. The system can restart for
several reasons, e.g. commanded reboot from the system reboot webpage, or a power cycle
of the equipment.
Ethernet Link Status Current status of the Ethernet link. A state of 'Up' with a green
background indicates that an Ethernet link is established. A state of 'Down' with a red
background indicates that the Ethernet link is not established.
Issue 1.1 April 2006 Page 53