Table of Contents
Advertisement
Elapsed Time Indicator The elapsed time indicator attribute presents the total time in days,
hours, minutes and seconds since the last system restart. The system can restart for several
reasons, e.g. commanded reboot from the system reboot webpage, or a power cycle of the
equipment.
System Clock If SNTP (Simple Network Time Protocol) is enabled, or the clock has been
set, then a system clock attribute is displayed giving the date and time of the last page
refresh. Section 8.3.9.5 explains how to enable SNTP and section 8.3.9.6 explains how to set
the clock.
8.1.1
Home Page Alarm Display
The home page is also used to display all outstanding major system alarms. Whenever
system alarms are asserted a yellow warning triangle is displayed on webpage navigation
bar. The warning triangle will be visible from all web pages. Clicking the warning triangle will
cause the webpage to jump back to the system homepage. Figure 20 shows an example of
an alarm screen.
Issue 1.1 April 2006
Figure 19: 150/300 Mb BH Home Page
Page 50
Advertisement
Table of Contents
