Reboot - Motorola Canopy 300 Mbps Backhaul User Manual

9.4

Reboot

To erase the units configuration the user should press the "Reboot" button on the "Recovery
Options" page (Figure 74). The user will now be presented with a pop up box asking them to
confirm the action (Figure 84).
The unit will now reboot. The unit should now start up in normal operational mode. Should the
unit fail to start up the user should refer to section 10 "Fault Finding".
Issue 1.1 April 2006
Figure 84: Reboot Confirmation Pop Up
Page 116