Client-Side Settings; Remote Fax Tx Settings; Remote Fax Rx Settings - Canon imageRUNNER ADVANCE C5051 Getting Started

Client-Side Settings

Remote Fax TX Settings

You can set the Remote Fax TX settings for when you are using the machine as a client.
■ Remote Fax TX Server Address
You can specify the IP address or the host name for the imageRUNNER ADVANCE series (Remote Fax Server) on the server-side.
To specify the IP address, you can register the IPv4 address and IPv6 address.
■ TX Timeout
If the TX Timeout time is set and the set time has elapsed, the remote fax job is canceled when the Remote Fax Server is not responding.
■ Number of Lines for Sending
You can set the number of lines you can select when sending remote fax. Set the number of lines to the same number of telephone lines
connected to the remote fax server.
■ Setting the Priority Line
You can set the telephone line to use when sending a remote fax.
If you set automatic selection for [Select Line] in [Options] or in the settings for a TX line registered in the Address Book, the set line is used
for sending.
1
Press
Settings] .
● To specify the remote fax server address:
☐
☐
13
● To specify the TX Timeout settings:
☐
☐
● To select the number of lines to use for sending:
☐
☐
● To select the priority line:
☐
☐

Remote Fax RX Settings

You can specify the settings for receiving remote faxes from the client-side. To receive remote faxes, it is necessary to specify
the settings to receive forwarded documents from the server machine as an I-fax. For information on I-Fax settings, see "Flow
of Settings for Using Each Function" at the beginning of this manual.
13-8
Remote Fax Settings
(Settings/Registration) → [Function Settings] → [Send] → [Fax Settings] → [Remote Fax TX
Press [Remote Fax Server Address].
Enter the host name or the IP address → press [OK].
A host name is a name assigned to a host computer that provides services on the network. Enter the name for Remote Fax Server.
Press [TX Timeout].
Specify the TX timeout time by pressing [-] or [+] → press [OK].
Press [No. of TX Lines].
Set the telephone line number to use for sending.
Press [Select Priority Line].
Select [Auto] or the line to use as a priority.