Machine Settings Mode ('5') - Canon NP6621 Service Handbook

SERVICE MODE
G. Machine Settings Mode ('5')
• To start machine settings mode, press '5' (numeric keypad) and then the AE key.
• To select an item, press the appropriate number on the numeric keypad and then the Start key.
• To change the value, enter the new value on the numeric keypad, and press the AE.
• To deselect the item, press the Clear key.
• A press on the Start key will execute appropriate copying operations.
No.
501 Multifeeder paper width sensor
characteristics registration
502 Copy density notation switch (9-/
17- step)
503 Auto energy saver function deacti-
vation
504 Copy count upper limit set
505 Universal cassette paper size
storage (cassette 1)
506 Separation static eliminator output
voltage switch
507 Fixing forced wait
509 Universal cassette paper size
storage (cassette 2)
510 Universal cassette paper size
storage (cassette 3)
7–14
Item
See p. 2-19.
9-step:
17-step:
default:
• Entering '1' on the numeric keypad causes the indica-
• Entering '0' on the numeric keypad causes the indica-
settings:
default:
When set to '0', 100 copies.
See p. 2-20.
0:
1:
default:
Activating the item increases the time of initial rotation.
Activate it if the fixing on the first copy is poor because
of a low-temperature environment.
Table 7-714-1
Description
0
1
0 (9-step)
tion to change to 'ON', activating the auto enegy saver
function.
tion to change to 'OFF, deactivating the function.
default: activated
0 to 99
0
settings: 0 to 14
default: 0
2 kV
4 kV
0
0: deactivated
1: activated
default: 0
settings: 0 to 14
default: 0
settings: 0 to 14
default: 0