Protocol Settings; Tcp/Ip Settings; Smb And Wins Settings - Canon imageRUNNER ADVANCE C5051 Getting Started

Protocol Settings

This section describes how to specify the protocol settings for the machine using the control panel. If you are configuring the
settings for the first time, use the control panel of the machine.
After configuring the settings, you can change them using software other than the control panel of the machine. For details,
see e-Manual > Settings/Registration.

TCP/IP Settings

1
Specify the TCP/IP settings .
If you have not entered the TCP/IP settings yet, enter them now. (For more information, see "TCP/IPv4 Settings, " on p. 4-3, "TCP/IPv6
Settings, " on p. 4-8 and "Settings Common to TCP/IPv4 and TCP/IPv6, " on p. 4-14.)

SMB and WINS Settings

To use the machine on an SMB/CIFS network, specify the SMB settings.
To resolve a name with WINS(Windows Internet Name Service), specify the WINS settings using the following procedure. WINS
is a service for associating a NetBIOS name (which is a computer name or printer name on an SMB/CIFS network) with an IP
address. To use WINS, specify the IP address settings for the WINS server.
1
On the Network screen, press [SMB Server Settings] → select [On] for <Use SMB Server> .
If you set <Use SMB Server> to 'On' , the machine will not enter a complete Sleep mode.
2
On the SMB Server Settings screen, specify the following .
[Server Name]: Enter the name of the computer that the machine will belong to. Be sure to enter a name that is not being used by
another computer or printer on the network.
[Workgroup]: Enter the name of the workgroup that the machine will belong to. If there are no workgroups in the environment you
are using, create a workgroup in Windows and enter the name of that workgroup.
[Comment]: If necessary, you can enter a comment relating to the machine. When the printer information is displayed, the comment
entered here is also displayed.
[On] for <LM Announce>: The LAN Manager can be informed of the existence of the machine.
[Off ] for <LM Announce>: If the LAN Manager is not required to browse the machine, setting <LM Announce> to 'Off' reduces
network traffic.
•
You cannot enter the domain name as [Workgroup].
•
You cannot enter a character string in [Server Name] and [Workgroup] that includes blanks.
6-3

Protocol Settings

6