Registering Sender Names - Canon imageRUNNER ADVANCE C5051 Getting Started

Registering Sender Names

For fax, you can register any name as the Sender Name, such as the section or department's name, or an individual's name.
The registered Sender Name can be displayed on the touch panel display of the receiving party's machine and/or printed at
the top of the documents that you send as the sender's information.
•
You can set to display/print the Sender Name instead of the name stored as the unit's name from the Options screen. (See e-Manual >
Using the Machine to Send/Receive a Fax.)
•
You can use this function if the fax board is installed or the Remote Fax Kit is activated.
1
Press
Sender Name (TTI)] .
2
Select the number under which you want to register the Sender Name → press [Register/Edit] .
You can store up to 99 sender names (01 to 99).
To delete a stored Sender Name, select the number under which the name is registered → press [Delete]. Only one sender name can
be deleted at a time.
3
Enter the Sender Name → press [OK] .
13
13-6
Fax Settings
(Settings/Registration) → [Function Settings] → [Send] → [Fax Settings] → [Register