Canon imageRUNNER ADVANCE C5051 Getting Started page 84

7
On the TCP/IP Settings screen, press [DNS Settings] → [DNS Server Address Settings] .
8
4
In <IPv6>, specify the following .
If you want to use dynamic DNS updating, enter the IPv6 address of the DNS server in [Primary DNS Server].
If you do not want to specify a secondary DNS server, leave [Secondary DNS Server] blank.
•
You cannot enter any of the following types of address for [Primary DNS Server] or [Secondary DNS Server]:
- Multicast address
- Address composed entirely of zeros
- Link local address
•
If you set <Use DHCPv6> to 'On' in step 5, the IPv6 address of a DNS server you set manually will be overwritten.
9
On the DNS Settings screen, press [DNS Host/Domain Name Settings] → in <IPv6>, specify the
following .
[On] for <Use Same Host Name/Domain Name as IPv4>: You can set the same host name or domain name used with IPv4
communication for IPv6 communication. If you set <Use Same Host Name/Domain Name as IPv4> to 'Off' , enter the name of the
machine in [Host Name] and the name of the domain the machine belongs to in [Domain Name]. It is necessary to set a host name
and domain name if you want to use dynamic DNS updating.
If you set <Use DHCPv6> to 'On' in step 5, the domain name you set manually will be overwritten. Even if you set <Use Same Host
Name/Domain Name as IPv4> to 'On' , the domain name obtained from the DHCPv6 server is used.
4-12
Protocol Settings