Enabling The Machine To Be Accessed From Web Browsers - Canon imageRUNNER ADVANCE C5051 Getting Started

3
Press [On] .
[On]: SSL communication is used.
[Off ]: SSL communication is not used.
•
The settings for [SSL Settings] are also applied to the settings for <Use SSL> in [Remote UI] in [Management Settings] (Settings/
Registration).
•
To set [SSL Settings] to 'On' , it is necessary to set the key pair and server certificate required for performing encrypted SSL
communications in [Certificate Settings] in [Management Settings] (Settings/Registration). For information on generating the key
for SSL, see e-Manual > Security.
4
Press [OK] .
The selected mode is set.
5
Turn the main power of the machine OFF, wait 10 seconds, and then turn the power ON .
The [SSL Settings] setting is activated only after you restart the machine (the main power switch is turned OFF, and then back ON).
For information on how to turn ON and OFF the main power of the machine, see Chapter 1, "Before You Start Using This Machine. "

Enabling the Machine to be Accessed from Web Browsers

Use to access the machine from a Web browser to use the MEAP function.
By setting [Use HTTP] to 'On' , you can open a necessary port. However, it is recommended that it is set to 'Off' , if a port is not used. If you
leave the port open, an unauthorized user may access the machine.
•
The default setting is 'On' .
•
To specify the Management Settings (Settings/Registration), you must log in by entering the System Manager ID and System Password.
1
Press (Settings/Registration) → [Preferences] .
2
Press [Network] → [TCP/IP Settings] → [Use HTTP] .
Before Starting SMS (Preparations)
8
8-7