Installing the System Options Using the Touch Panel Display
You can install the system options to the machine by registering the license key using the touch panel display.
To perform the procedures described in this section, you must log in to the machine as an administrator. (See e-Manual > Settings/
Registration.)
1
Press
2
Enter the license key using
9
Details of each item are shown below.
[ ][ ]:Press to move the cursor.
[Backspace]: Press when you entered a wrong number. The number in front of the cursor is deleted and you can reenter the correct
number.
If the message <The value for the license key is not correct. Check the license key.> is displayed, press [OK] → enter the correct license
key.
If the message <The feature required for installation is not present.> is displayed, you cannot register the license key. Press [OK] →
cancel the registration.
3
Press [OK] .
The registered functions can be used only after you restart the machine.
9-12
Installing by Not Connecting this Machine to an Outside Network
(Settings/Registration) → [Management Settings] → [License/Other] → [Register License] .
-
(numeric keys) → press [Start] .