Drive System (Motors) - Canon DR-9080C Service Manual

CHAPTER 3 DISASSEMBLY & REASSEMBLY
II . DRIVE SYSTEM
(MOTORS)
1. Main motor
1) Detach the right cover assembly.
2) After removing four screws
belt and pull out the main motor assembly
.
Screw
Main motor assembly
Fig. 3-201
3 - 12
, detach the
Belt
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3) Remove two screws
connector , and detach the main motor
Connector
Main motor
Fig. 3-202
Precautions during assembly
• Fix the main motor assembly position so that
the belt does not miss the sprockets.
However, the fixing should not be tightened too
much.
, unhook the
.
Screw