CHAPTER 3 DISASSEMBLY & REASSEMBLY
4)
After removing six gears
screws
and the connector
dismount the document tray motor
Gear
Connector
Fig. 3-205
Precautions during assembly
• When installing the document tray driving unit
into the main body, be careful with the
positioning. Refer to the section entitled
"Document tray front cover".
• Make sure that the reinforcing plate is lowered
to the bottom before the installation.
Fig. 3-206
3 - 14
, remove two
, and
.
Screw
Document tray motor
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3. Pick-up motor
1)
Detach the front delivery cover.
2)
Remove one screw A
(self-tapping)
.
Screw A
Fig. 3-207
and four screws B
Screw B