Canon DR-9080C Service Manual page 118

CHAPTER 3 DISASSEMBLY & REASSEMBLY
2. Back reading unit
1) Detach the platen unit and the lower reading
roller. Refer to the "Lower reading roller"
section.
2) Unhook the cable clamp
reading unit out toward the front.
Cable clamp
Fig. 3-403
3) Unhook three connectors
back reading unit
Fig. 3-404
Connector
3 - 36
and pull the back
Back reading unit
and detach the
.
Back reading unit
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
Precautions during assembly
• Be careful not to pull in the connected cable
assembly.
• Since the leaf spring is attached to the rear side
of the back reading unit, push it as far as it will
go while pressing it against the bottom.
• Clean the reading glass.