Service Modes; Iii. Service Modes - Canon DR-9080C Service Manual

III. SERVICE MODES

1. Overview
The service modes of this machine can be
enabled by installing the service mode software
(found on the bundled setup disk) on a personal
computer to be used for servicing.
The system requirements of the personal
computer to be used should be equivalent to those
described in the User's Manual. In the case of a
slower CPU or less memory, the processing time
may become longer, though the service modes will
still be available.
Fig. 5-301 shows the Service window.
Fig.5-301
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
CHAPTER 5 TROUBLESHOOTING
In the Service window, buttons for executing
each mode are displayed. Each Service mode
starts from this window. In the Service window of
this machine, English is basically used, except for
the OS-related displays.
1) Regist
Registration adjustment for image scanning
2) Firm Load
Firmware update.
3) Dcon Check
The operation of various kinds of hardware
such as operation keys, sensors, operation
panel LEDs, motors, solenoids, and shading
plates is checked.
4) Check Device
Versions of devices located inside the
machine are displayed and the imprinter is
checked.
5) Analog
Displays analog values of sensors.
6) About
Displays the version of the service mode
software.
7) Counter
The total number of fed sheets and the
number of document jams can be displayed
and changed.
5 - 7