Usb Connections; Usb 2.0 Interface Cards - Canon DR-9080C Service Manual

Chapter 2 Preparation Before Use

USB Connections

Connect the scanner to the computer.
To connect the scanner with a USB interface cable, you will need the following items
that are not included in the package.
Important
G USB interface cable
Use an interface cable that supports Hi-Speed USB 2.0.
G USB interface card
Use an extended USB interface card that is compatible with Hi-Speed USB 2.0 and
operationally tested by Canon.
N USB 2.0 Interface Cards
Be sure to use one of the recommended USB 2.0 interface cards when
connecting the scanner with a USB interface cable. The recommended USB 2.0
interface cards are listed below.
Recommended USB 2.0 interface cards
Manufacturer:
Product:
G Be sure to follow the installation procedure in your computer's operation manual
when installing the USB 2.0 interface card to your computer.
Important
G Use the most recent USB 2.0 driver provided by Adaptec or Microsoft.
G Windows NT operating systems do not support USB. Use a SCSI cable to connect
the scanner to computers with Windows NT operating systems.
G Use a USB hub that supports USB 2.0 if you need to use a USB hub.
G This scanner has passed the Hi-Speed USB 2.0 verification test. However, it may not
function properly even when Hi-Speed USB 2.0 is built-in a computer as standard.
G Scan speed may slow down when Hi-Speed USB 2.0 is not supported.
22
Adaptec
USB 2 Connect 2000LP (AUA-2000)
USB 2 Connect 3100 (AUA-3100LP)
USB 2 Connect 5100 (AUA-5100)
USB 2 Connect for Notebooks (AUA-1420)