CHAPTER 3 DISASSEMBLY & REASSEMBLY
6. Pick-up solenoid
1)
Take off the Front delivery cover.
2)
Unhook the connector
screws
.
Connector
Fig. 3-217
3)
Lift the end of the shaft
detach the solenoid
Shaft
Fig. 3-218
3 - 18
and remove two
Screw
to pull it off and
.
Solenoid
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
Precautions during assembly
• Push in the shaft by fitting the D-cut of the shaft
into the groove.
• With the plunger of the solenoid pushed
downward, fix the solenoid at the position
where the pick-up roller raises upward.
Fig. 3-219