Upper Unit - Canon DR-9080C Service Manual

10. Lower front cover
1) Detach the right/left cover assembly.
2) Remove the document tray driving unit. Refer
to the section entitled "Document tray front
cover".
3) Take off the lower front cover
three screws .
Screw
Fig. 3-125
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
by removing
Lower front cover
CHAPTER 3 DISASSEMBLY & REASSEMBLY

11. Upper unit

1) Detach the right/left cover assembly.
The upper unit should be closed.
2) First, remove one screw
spring .
Remove two screws (with round-shaped tips)
and dismount the damper (white)
Loosen one screw
remove the E-ring
and belt in sequence. Remove the
additional two screws
.
Note: Be careful not to drop the parallel pin.
Screw
Screw
Tensioner
E-ring
Pin
Screw
Fig. 3-126
to release the leaf
.
of the tensioner and
, pulley , and pin
and detach the pivot
Leaf spring
Damper
Screw
Pulley
Belt
Pivot
3 - 9