Canon DR-9080C Service Manual page 132

CHAPTER 4 INSTALLATION & MAINTENANCE
No.
6 Connect a personal computer to this machine
using a SCSI or USB cable.
When connecting a SCSI cable, change the
SCSI ID and terminator settings if necessary.
If this machine is connected at the end of the
daisy chain, be sure to switch on the terminator.
7 After turning on power to the machine, turn on
power to the personal computer.
Note: Before turning on power to the personal
computer, make sure that "00000"
appears on the counter display of the
operation panel.
8 Install the driver and application software on the
personal computer. For details, refer to the
user's manual.
9 Check if the machine operates normally.
For details, refer to the user's manual.
4 - 4
Procedure
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
Inspection/Remarks