Epson FilmScan 200 Service Manual page 79

5.3 TROUBLESHOOTING
Some symptoms are sufficient to allow you to determine the difficulty at the unit level. Refer to Table 5-4,
determine what the problem is, then perform the checks according to the corresponding flowchart.
Table 5-4. Symptoms and Reference Page
Symptom
The unit does not operate
when power is turned on.
Error message "Fatal Error" · The carrier unit does not move.
is displayed, and the
problem Is not corrected by
switching power off and then
on again.
The scanner does not read
the image cleanly.
The error message
"Interface error" is
displayed.
The film carrier does not
move properly.
Rev. A
·OPERATE LED does not light.
· The scanner does not begin initialisation.
· The scanner displays the error when the carrier hits
at the front of the frame or the back of the frame.
· The fluorescent lamp does not light..
· The scanner does not read the image cleanly.
· Bi-directional parallel interface error
· SCSI interface error
· The auto-loading function does not work properly.
Problem
TROUBLESHOOTING
See Page
5-4
5-4
5-5
5-5
5-6
5-6
5-7
5-7
5-8
5-3