FilmScan 200
1.4 FUNCTIONS
This section describes the scanner functions.
1.4.1 Switches and Indicators
Switches
OPERATE switch:
Turns the scanner on and off.
When the power is turned on, the scanner is initialized.
RESET switch:
Initializes the scanner.
Rotary switch (SCSI model only):
0-7: SCSI ID (Factory setting ID = 2)
8-9: Reserved
Terminator switch (SCSI model only):
On: Terminator on (Factory setting)
off: Terminator off
Indicators
OPERATE (Green LED):
Indicates the OPERATE switch is on.
READY (Green LED):
Comes on when the scanner is ready to receive data.
Blinks in combination with the ERROR LED when an error occurs.
ERROR (Red LED):
Indicates an Error (Refer to section 1.4.2.).
1-12
REV.-A