HP MSR series Command Reference Manual page 157

Examples
# Display configuration and state information about all frame relay bundles and frame relay bundle
links.
<Sysname> display mfr
Bundle interface:MFR1, Bundle state = up,
fragment enabled, MFR bundle fragment size = 222
original packet be assembled/fragmentized (in/out): 0/0
droped fragment (in/out): 0/0
Bundle name = MFR1
Bundle links:
Serial2/0, PHY state = up, link state = up,
Table 29 Command output
Field
Bundle interface
Bundle state
Bundle class
fragment enabled
MFR bundle fragment size
original packet be assembled/fragmentized (in/out)
droped fragment (in/out)
Bundle name = MFR0
Bundle links
Serial2/0, PHY state = up, link state = up, Link name
= Serial2/0
# Display detailed state information about all frame relay bundle links.
<Sysname> display mfr verbose
Bundle interface:MFR1, Bundle state = up,
fragment enabled, MFR bundle fragment size = 222
original packet be assembled/fragmentized (in/out): 0/0
droped fragment (in/out): 0/0
Bundle name = 2
Bundle links:
Serial2/0
Bound to MFR1(BID:2)
Physical state: up, link state: up,
Bundle Link statistics:
Hello(TX/RX):
LID : Serial2/0 Peer LID: Serial2/0
10/10
Bundle class = A,
Link name : Serial2/0
Description
Bundle interface.
Operating state of the bundle interface.
Class A indicates that the bundle is up if one or more
bundle link is up. The bundle is down only when all
bundle links are down.
Indicates whether fragmentation is enabled.
Maximum fragment size allowed by the FR link.
Number of assembled packets received on the bundle
interface and number of unfragmented packets before
being sent by the bundle interface.
Number of dropped incoming and outgoing packets
on the bundle interface.
Name of multilink frame relay bundle.
Physical interfaces of the links in the bundle.
Physical interface on the bundle link, the state of
interface at the physical layer and link layer, the name
of the bundle link (name of the physical interface by
default).
Bundle class = A,
145