Interface Virtual-Template; Mtu - HP MSR series Command Reference Manual

<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-Mp-group3]

interface virtual-template

Use interface virtual-template to create a VT and enter VT view. If the VT already exists, enter its view
directly.
Use undo interface virtual-template to remove a VT.
Syntax
interface virtual-template number
undo interface virtual-template number
Views
System view
Default command level
2: System level
Parameters
number: VT number in the range of 0 to 1023.
Usage guidelines
To remove a VT, make sure that all the corresponding VA interfaces are removed and the VT is not in use.
Examples
# Create interface VT 10.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10]

mtu

Use mtu to set the MTU size of the interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU of an interface is 1500 bytes.
Views
Virtual-template interface view, dialer interface view, MP-group interface view
Default command level
2: System level
29