Display Ppp Compression Stac-Lzs - HP MSR series Command Reference Manual

Field
Compress/Error/Discard/Total: 0/0/0/0 (Packets)
Sent
Compress/Total: 0/0 (Packets)
Send/Save/Total: 0/0/0 (Bytes)
Connect:
Rx
Tx
Long-search/Miss

display ppp compression stac-lzs

Use display ppp compression stac-lzs to display the statistics on STAC-LZS compression.
Syntax
display ppp compression stac-lzs [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Interface type and interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
When Stac LZS compression is enabled on an MP link, the compression is performed on the VA
interfaces. In this case, you can check the compression information on MP templates, such as VT or
Dialer.
When Stac LZS compression is enabled on a normal PPP link, the compression is performed on the
physical link. In this case, you can check the compression information on the physical interfaces only.
Description
The number of received
compressed/error/discarded/total packets is
0/0/0/0.
Statistics on sent packets.
The number of sent compressed/total packets is
0/0.
The bytes of sent/saved/total packets are
0/0/0.
Number of connections.
Number of connections that the receiver can
decompress.
Number of connections that the sender can
compress.
Times of searching compression entries and
times of search failures.
44