Ppp Mp; Ppp Mp Binding-Mode - HP MSR series Command Reference Manual

Parameters
size: MTU in bytes, in the range of 128 to 1500.
Examples
# Set the MTU of VT 10 to 1200 bytes.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] mtu 1200
# Set the MTU of MP group 1 to 1200 bytes.
<Sysname> system-view
[Sysname] interface mp-group 1
[Sysname-Mp-group1] mtu 1200

ppp mp

Use ppp mp to configure an interface encapsulated with PPP to operate in MP mode.
Use undo ppp mp to restore the default.
Syntax
ppp mp
undo ppp mp
Default
An interface encapsulated with PPP operates in the single PPP mode.
Views
Interface view
Default command level
2: System level
Usage guidelines
To obtain more bandwidth, you can bind multiple PPP links to form a logical MP interface.
Examples
# Configure interface Serial 2/0 to operate in MP mode. (Assume that the interface has PPP
encapsulation enabled.)
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ppp mp

ppp mp binding-mode

Use ppp mp binding-mode to set the way in which MP binding is performed.
Use undo ppp mp binding-mode to restore the default.
Syntax
ppp mp binding-mode { authentication | both | descriptor }
30