Reset Dlsw Ethernet-Backup Circuit; Reset Dlsw Ethernet-Backup Map - HP MSR series Command Reference Manual
Layer 2 wan
Hide thumbs
Also See for MSR series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Views
User view
Default command level
2: System level
Parameters
circuit-id: DLSw virtual circuit ID in the range of 0 to 0xFFFFFFFF.
Usage guidelines
This command without circuit-id clears the information of all DLSw virtual circuits. Otherwise, this
command clears the information of the specified virtual circuit.
Examples
# Clear the information of virtual circuit 100.
<Sysname> reset dlsw circuits 100
reset dlsw ethernet-backup circuit
Use reset dlsw ethernet-backup circuit to clear virtual circuit information after the Ethernet redundancy
function is enabled.
Syntax
reset dlsw ethernet-backup circuit
Views
User view
Default command level
2: System level
Examples
# Clear virtual circuit information after the Ethernet redundancy function is enabled.
<Sysname> reset dlsw ethernet-backup circuit
reset dlsw ethernet-backup map
Use reset dlsw ethernet-backup map to clear the mapping rules learned by the secondary MAC address
translation device.
Syntax
reset dlsw ethernet-backup map
Views
User view
Default command level
2: System level
Examples
# Clear the mapping rules learned by the secondary MAC address translation device.
<Sysname> reset dlsw ethernet-backup map
271
Advertisement
Table of Contents
