Napoleon LVX38N Installation Manual page 62

Luxuria series
Hide thumbs Also See for LVX38N:
Table of Contents

Advertisement

finishing
EN
Door trim
D.
For door removal, locate the top and bottom door latches. Pull latches forwards and away to
disengage door latches.
note:
Ensure to leave one hand on the glass door during entire door removal.
E.
Tilt the top of the door forwards 90 degrees, then lift it up and out of the door latches.
F.
Reverse these steps to re-install the door, ensure the top and bottom door latches are properly
engaged prior to releasing the door (Wider units will have more latches).
note:
Ensure the door opens freely and closes sealed.
IMPORTANT: Once latches are engaged, test to make sure that the door is sealed
FIXED - SEE-THRU ONLY
G.
Remove GGA from fixed side.
H.
Remove the screws securing the door to the appliance.
I.
Tilt the top of the door forward, then lift it up and out of the bottom door retainer.
J.
When re-installing the door, lift onto the bottom door retainer, tilt the top towards the appliance
and secure with the previously removed screws.
note:
Under normal conditions, there is no reason to remove the fixed side of the firebox glass door.
Servicing can be completed from the access side.
62
W415-1710 / A / 07.27.17
Side view
Door frame
LVX38 Illustrated
LVX38 Illustrated

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents