Napoleon LVX38N Installation Manual page 23

WARNING
!
• Do NOT cover or place any items in the Dynamic Heat Control™ air outlet. Failure to comply with these instructions will
create a fire hazard.
ir flow within the air passage is not restricted in any way with the exception of approved venting.
• Ensure a
Read Dynamic Heat Control™ section before proceeding.
No materials of any type
are permitted in this area
not be used past
Stud
Standoff
Upper
Frame
Air flow in the shaded area must not be restricted in any way with the exception of an approved appliance vent system.
No other items are allowed in this area
Shaded framing must use non-combustible materials. No combustible materials allowed in this area or the space
between studs (i.e. no wiring, conduits, electrical bores, combustible framing members, etc.)
Dynamic
Heat Con-
trol™ air
outlet opening
2"
Combustible
studding MUST
the dotted line
Single-Sided
*Restrictions also apply to see-thru when one or more recess is used.
installation planning
4.0 installation planning
enclosure top and/or ceiling
Dynamic
Heat Con-
trol™ air
outlet opening
Single-Sided
(Recessed)*
Dynamic
Heat Con-
trol™ air
outlet opening
outlet opening
See-thru
W415-1710 / A / 07.27.17
EN
Dynamic
Heat Con-
trol™ air
23