Drive Information - Lexus LC500 2017 Owner's Manual

Warning message display
Settings display
Opening image display
■
When the engine switch <power switch> is
in ACCESSORY mode or IGNITION ON
mode <ON mode>, the opening image is
displayed on the multi-information display.
While the opening image is being dis-
played, the meter display cannot be
changed even if the drive mode is changed.
When the start-up display is finished, the
meter display for the currently selected
mode will be displayed.
When disconnecting and reconnecting
■
12-volt battery terminals
Record of the maximum G-forces will be
reset.
Liquid crystal display
■
→P.77
WARNING
■ Caution for use while driving
● When operating the multi-information
display while driving, pay extra atten-
tion to the safety of the area around the
vehicle.
● Do not look continuously at the multi-
information display while driving as
you may fail to see pedestrians, objects
on the road, etc. ahead of the vehicle.
LC500_LC500h_OM_OM11405U_(U)
2-1. Instrument cluster
■ The information display at low tem-
peratures
Allow the interior of the vehicle to warm
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display
monitor may respond slowly, and display
changes may be delayed.
For example, there is a lag between the
driver's shifting and the new gear number
appearing on the display. This lag could
cause the driver to downshift again,
causing rapid and excessive engine brak-
ing and possibly an accident resulting in
death or injury.
Changing the meter display
The multi-information display is oper-
ated using the meter control switches.
/ : Switch menu
A
/ : Change displayed con-
tent, scroll up/down the screen and
move the cursor up/down
Press: Enter/Set
B
Press and hold: Reset
Return to the previous screen and
C
move the main meter

Drive information

Content of drive information
■
Select to display various drive data.
79
2