162
4-2. Driving procedures
Turn signals can be operated when
■
The engine switch <power switch> is in
IGNITION ON mode <ON mode>.
If the indicator flashes faster than usual
■
Check that a light bulb in the front or rear
turn signal lights has not burned out.
■
If the turn signals stop flashing before a
lane change has been performed
Operate the lever again.
■
Customization
→P.391
LC500_LC500h_OM_OM11405U_(U)
Parking brake
The parking brake can be set or
released automatically or manually.
In automatic mode, the parking
brake can be set or released auto-
matically according to shift lever
operation. Also, even in automatic
mode, the parking brake can be set
or released manually.
Operating instructions
Using the manual mode
■
The parking brake can be set and
released manually.
U.S.A.
A
Canada
B
1
Push the switch to set the parking
brake
The parking brake indicator light will turn
on.
Press and hold the parking brake switch if
an emergency occurs and it is necessary to
operate the parking brake while driving.