Lexus LC500 2017 Owner's Manual page 49

child restraint system is securely in
place.
After the shoulder belt has retracted to a
point where there is no slack in the belt,
pull the belt to check that it cannot be
extended.
7 If the child restraint has a top tether
strap, follow the child restraint man-
ufacturer's operation manual
regarding the installation, using the
top tether strap to latch onto the
top tether strap anchor. (→P.52)
8
After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(→P.50)
Booster seat
■
1 If installing the child restraint sys-
tem to the front passenger seat is
unavoidable, refer to P.45 for front
passenger seat adjustment.
2
High back type: If the head restraint
interferes with your child restraint
system, and the head restraint can
be removed, remove the head
restraint. Otherwise, put the head
restraint in the upper most position.
(→P.119)
3
Place the child restraint system on
the seat facing the front of the vehi-
cle.
LC500_LC500h_OM_OM11405U_(U)
1-2. Child safety
Booster type

High back type

4 Sit the child in the child restraint
system. Fit the seat belt to the child
restraint system according to the
manufacturer's instructions and
insert the plate into the buckle.
Make sure that the belt is not
twisted.
Check that the shoulder belt is correctly
positioned over the child's shoulder and
that the lap belt is as low as possible.
(→P.25)
49
1