Liquid crystal display
■
Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
Customization
■
The meter display can be customized on
the multi-information display. (→P.391)
NOTICE
To prevent damage to the engine and
■
its components
●
Do not let the indicator of the tachom-
eter enter the red zone, as it rep-
resents the engine speed range which
exceeds the maximum safe engine
speed.
●
In the following situations, the engine
may be overheating. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (→P.364, 366)
• The engine coolant temperature
gauge is in the red zone (H).
• LC500: The engine oil temperature
gauge is in the red zone (H).
Changing between the odome-
ter and trip meter
The odometer and trip meter displays
can be switched. When the trip meter
is displayed, pressing and holding the
button will reset the trip meter.
LC500_LC500h_OM_OM11405U_(U)
2-1. Instrument cluster
Changing the Instrument panel
light brightness
The brightness of the instrument panel
lights can be adjusted.
1
Darker
2
Brighter
■
Instrument panel brightness adjustment
The instrument panel brightness levels
when the tail lights are on and off can be
adjusted individually. However, when the
surroundings are bright (daytime, etc.),
turning on the tail lights will not change the
instrument panel brightness.
Changing the display
The display can be switched between
the center and side positions.
77
2