Cleaning And Protecting The Vehicle Exterior; Maintenance And Care - Lexus LC500 2017 Owner's Manual

Hide thumbs Also See for LC500 2017:
Table of Contents

Advertisement

274

6-1. Maintenance and care

6-1.Maintenance and care
Cleaning and protecting the
vehicle exterior
Perform cleaning in a manner
appropriate to each component
and its material.
Cleaning instructions
 Working from top to bottom, liber-
ally apply water to the vehicle body,
wheel wells and underside of the
vehicle to remove any dirt and dust.
 Wash the vehicle body using a
sponge or soft cloth, such as a
chamois.
 For hard-to-remove marks, use car
wash soap and rinse thoroughly with
water.
 Wipe away any water.
 Wax the vehicle when the water-
proof coating deteriorates.
If water does not bead on a clean surface,
apply wax when the vehicle body is cool.
CFRP (Carbon Fiber Reinforced Plas-
tic) part (if equipped)
As the CFRP parts may change color if
they are exposed to ultraviolet rays for
extended periods of time, Lexus recom-
mends that your vehicle be stored in a
place where it will not be exposed to
direct sunlight.
Do not use wax that contains abrasives.
Do not use automatic car washes as they
may scratch the CFRP parts and damage
the paint.
Self-restoring coat
The vehicle body has a self-restoring coat-
ing that is resistant to small surface
LC500_LC500h_OM_OM11405U_(U)
scratches caused in a car wash etc.
*
Do not use baking soda (sodium bicarbon-
ate) and wax that contains abrasives.
*
If the door handle becomes wet while the
electronic key is within the effective range,
The coating lasts for 5 to 8 years from
when the vehicle is delivered from the
plant.
The restoration time differs depending on
the depth of the scratch and outside tem-
perature.
The restoration time may become
shorter when the coating is warmed by
applying warm water.
Deep scratches caused by keys, coins,
etc. cannot be restored.
Do not use wax that contain abrasives.
: CFRP parts (if equipped) do not have a
self-restoring coat.
Cleaning the areas with metal accents
Automatic car washes (vehicles without
CFRP parts)
Fold the mirrors before washing the vehi-
cle. Start washing from the front of the
vehicle. Make sure to extend the mirrors
before driving.
Wash the vehicle with the active rear
wing retracted. If the vehicle is washed
with the active rear wing raised, depend-
ing on the type of automatic car wash, the
brushes of the automatic car wash may
become stuck on the active rear wing. In
this case, the active rear wing may not be
washed very well or may even be
scratched or damaged.
Brushes used in automatic car washes
may scratch the vehicle body and dam-
age the paint.
High pressure car washes
Do not allow the nozzles of the car wash
to come within close proximity of the win-
dows.
Before using the car wash, check that the
fuel filler door on your vehicle is closed
properly.
Notes for the smart access system with
push-button start

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc500h 2017

Table of Contents