Lexus LC500 2017 Owner's Manual page 76

76
2-1. Instrument cluster
Rev peak
■
When the engine speed reaches or
exceeds the following, an afterimage of
the tachometer will be displayed at the
highest engine speed for approxi-
mately 1 second.
LC500: 3600 r/min
LC500h: 4000 r/min
■ The meters and display illuminate when
The engine switch <power switch> is in
IGNITION ON mode <ON mode>.
Variable red zone (LC500)
■
To help protect the engine, the engine
speed is controlled by starting the red zone
of the tachometer at different engine
speeds ranging from 3700 rpm to 7300
rpm depending on the engine coolant tem-
perature.
Before driving under extremely high load
conditions, make sure to sufficiently warm
up the engine.
LC500_LC500h_OM_OM11405U_(U)
Instrument panel brightness adjustment
■
The brightness of the instrument panel
lights is automatically adjusted based on the
light sensor detecting how bright the sur-
roundings are.
Outside temperature display
■
● In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change.
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit of
a garage, tunnel, etc.)
When "- -" or "E" is displayed, the system
●
may be malfunctioning.
Take your vehicle to your Lexus dealer.
■ Speed unit setting for the speedometer
When the speed unit has been changed
from the default setting, the vehicle speed in
the default unit is also displayed in the
meter.
Pop-up display
■
● In some situations, such as when a switch
operation is performed, a pop-up display
will be temporarily displayed on the
multi-information display.
Some pop-up displays can be set on/off.
●
(→P.82)