Lexus LC500 2017 Owner's Manual page 204

204
4-5. Using the driving support systems
Distance options
Medium
Short
Resuming follow-up cruising
when the vehicle has been
stopped by system control (vehi-
cle-to-vehicle distance control
mode)
After the vehicle ahead of you starts
off, press the +/RES switch.
Your vehicle will also resume follow-up
cruising if the accelerator pedal is
depressed after the vehicle ahead of
you starts off.
LC500_LC500h_OM_OM11405U_(U)
Vehicle-to-vehicle
distance
Approximately 130
ft. (40 m)
Approximately 100
ft. (30 m)
1
The speed control is also canceled when
the brake pedal is depressed.
(When the vehicle has been stopped by
system control, depressing the brake pedal
does not cancel the setting.)
2
However, when a vehicle ahead is not
detected, cruise control does not resume
when the vehicle speed is approximately
25 mph (40 km/h) or less.
When your vehicle is too close to a
vehicle ahead, and sufficient automatic
deceleration via the cruise control is
not possible, the display will flash and
the buzzer will sound to alert the driver.
An example of this would be if another
driver cuts in front of you while you are
following a vehicle. Depress the brake
pedal to ensure an appropriate vehi-
cle-to-vehicle distance.
Canceling and resuming the
speed control
Pressing the cancel switch cancels
the speed control.
Pressing the +/RES switch resumes
the cruise control and returns vehi-
cle speed to the set speed.
Approach warning (vehicle-to-
vehicle distance control mode)