312
6-3. Do-it-yourself maintenance
surface, the wheel nuts may loosen while
the vehicle is in motion, causing the tire to
come off.
2
Install the tire and loosely tighten
each wheel nut by hand by approxi-
mately the same amount.
Turn the wheel nuts until the washers come
into contact with the disc wheel.
Disc wheel
A
Washer
B
3
Lower the vehicle.
4
Firmly tighten each wheel nut two
or three times in the order shown in
the illustration.
LC500_LC500h_OM_OM11405U_(U)
Tightening torque:
103.3 ft•lbf (140 N•m, 14.3 kgf•m)
5
Stow the jack and all tools.
WARNING
When installing the tire
■
Failure to follow these precautions could
cause the wheel nuts to loosen and the
tire to fall off, resulting in death or serious
injury.
Never use oil or grease on the wheel
●
bolts or wheel nuts.
Oil and grease may cause the wheel
nuts to be excessively tightened, lead-
ing to bolt or disc wheel damage. In
addition, the oil or grease can cause
the wheel nuts to loosen and the wheel
may fall off, causing a serious accident.
Remove any oil or grease from the
wheel bolts or wheel nuts.
Have the wheel nuts tightened with a
●
torque wrench to 103.3 ft•lbf (140
N•m, 14.3 kgf•m) soon as possible
after changing wheels.
●
Do not attach a heavily damaged
wheel ornament, as it may fly off the
wheel while the vehicle is moving.
When installing a tire, only use wheel
●
nuts that have been specifically
designed for that wheel.
●
If there are any cracks or deformations
in the bolt screws, nut threads or bolt
holes of the wheel, have the vehicle
inspected by your Lexus dealer.