Lexus LC500 2017 Owner's Manual page 262

262
5-6. Using the other interior features
Programming HomeLink
■
1 Press and release the HomeLink
button you want to program and
check that the HomeLink
tor light flashes (orange).
3 within 60 seconds of 1, or the
Perform
indicator light will stop flashing and pro-
gramming will not be able to be com-
pleted.
2
Point the remote control transmit-
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
from the HomeLink
Keep the HomeLink
view while programming.
For U.S.A. owners

3
Press and hold the handheld trans-
mitter button until the HomeLink
indicator light changes from slowly
flashing orange to rapidly flashing
green (rolling code) or continu-
LC500_LC500h_OM_OM11405U_(U)
®
®
®
indica-
®
buttons.
®
indicator light in
®
ously lit green (fixed code), then
release the button.
Programming an entry gate (for

U.S.A. owners)/Programming a
device in the Canadian market
3 Press and release the remote con-
trol transmitter button at 2 second
intervals, repeatedly, until the
®
HomeLink indicator light
changes from slowly flashing
(orange) to rapidly flashing (green)
(rolling code) or continuously lit
(green) (fixed code).
®
4 Test the HomeLink
pressing the newly programmed
button and observing the indicator
light:
 Device with fixed code: If the indica-
tor light is solid/continuous, pro-
gramming has been completed and
your garage door or other device
should operate when the Home-
®
Link button is pressed and
released.
 Device with rolling code: If the indi-
cator light flashes rapidly, your
garage door opener motor (or
other device) is equipped with a roll-
ing code. Complete the program-
ming process by firmly pressing and
operation by