Opening And Closing The Windows; Opening And Closing The Win- Dows; Power Windows - Lexus LC500 2017 Owner's Manual

3-5.Opening and closing the windows

Power windows

Opening and closing the power
windows
The power windows can be opened
and closed by one-touch operation of
the switches.
1
Closing
2 One-touch closing
3
Opening
4
One-touch opening
*
: To stop the window partway, operate the
switch in the opposite direction.
■ The power windows can be operated
when
The engine switch <power switch> is in
IGNITION ON mode <ON mode>.
■ Operating the power windows after
turning the engine <hybrid system> off
The power windows can be operated for
approximately 45 seconds after the engine
switch <power switch> is turned to ACCES-
SORY mode or turned off. They cannot,
however, be operated once either door is
opened.
■ Jam protection function
If an object becomes jammed between the
window and the window frame while the
window is closing, window movement is
stopped and the window is opened slightly.
LC500_LC500h_OM_OM11405U_(U)
3-5. Opening and closing the windows
Catch protection function
■
If an object becomes caught between the
door and window while the window is open-
ing, window movement is stopped.
When the window cannot be opened or
■
closed
When the jam protection function or catch
protection function operates unusually and
the door window cannot be opened or
closed, perform the following operations
with the power window switch of that door.
● Stop the vehicle. With the engine switch
<power switch> in IGNITION ON mode
<ON mode>, within 4 seconds of the jam
protection function or catch protection
function activating, continuously operate
the power window switch in the one-
touch closing direction or one-touch
opening direction so that the door win-
dow can be opened and closed.
If the door window cannot be opened
●
and closed even when performing the
above operations, perform the following
*
procedure for function initialization.
1
2
*
3
4
5
6
7
Close both side doors.
Turn the engine switch <power switch>
to IGNITION ON mode <ON mode>.
Pull and hold the power window switch
in the one-touch closing direction and
completely close the door window.
Release the power window switch for a
moment, resume pulling the switch in
the one-touch closing direction, and
hold it there for approximately 6 sec-
onds or more.
Press and hold the power window
switch in the one-touch opening direc-
tion. After the door window is com-
pletely opened, continue holding the
switch for an additional 1 second or
more.
Release the power window switch for a
moment, resume pushing the switch in
the one-touch opening direction, and
hold it there for approximately 4 sec-
onds or more.
Pull and hold the power window switch
in the one-touch closing direction
again. After the door window is com-
125
3