Lexus LC500 2017 Owner's Manual page 182

182
4-5. Using the driving support systems
WARNING
To avoid malfunction of the radar sen-
■
sor
Observe the following precautions.
Otherwise, the radar sensor may not
operate properly, possibly leading to an
accident resulting in death or serious
injury.
● Keep the radar sensor and front grille
emblem clean at all times.
A Radar sensor
Front grille emblem
B
If the front of the radar sensor or the front
or back of the front grille emblem is dirty
or covered with water droplets, snow,
etc., clean it.
Clean the radar sensor and front grille
emblem with a soft cloth so you do not
mark or damage them.
Do not attach accessories, stickers
●
(including transparent stickers) or
other items to the radar sensor, front
grille emblem or surrounding area.
Do not subject the radar sensor or sur-
●
rounding area to a strong impact.
If the radar sensor, front grille, or front
bumper has been subjected to a
strong impact, have the vehicle
inspected by your Lexus dealer.
● Do not disassemble the radar sensor.
● Do not modify or paint the radar sen-
sor, front grille emblem or surrounding
area.
LC500_LC500h_OM_OM11405U_(U)
● If the radar sensor, front grille, or front
bumper needs to be removed and
installed, or replaced, contact your
Lexus dealer.
To avoid malfunction of the camera
■
sensor
Observe the following precautions.
Otherwise, the camera sensor may not
operate properly, possibly leading to an
accident resulting in death or serious
injury.
● Keep the windshield clean at all times.
• If the windshield is dirty or covered
with an oily film, water droplets, snow,
etc., clear the windshield.
• If a glass coating agent is applied to the
windshield, it will still be necessary to
use the windshield wipers to remove
water droplets, etc. from the area of
the windshield in front of the camera
sensor.
• If the inner side of the windshield
where the camera sensor is installed is
dirty, contact your Lexus dealer.
● Do not install an antenna or attach
stickers (including transparent stick-
ers) or other items to the area of the
windshield in front of the camera sen-
sor (shaded area in the illustration).
● If the part of the windshield in front of
the camera sensor is fogged up or
covered with condensation or ice, use
the windshield defogger to remove the
fog, condensation or ice. (→P.243)