Finding Feature Information - Cisco ASR 1000 Series Configuration Manual

WCCPv2—IPv6 Support
This feature introduces support for Web Cache Communication Protocol version 2 (WCCPv2) in an IPv6
environment.
WCCP is a Cisco-developed content-routing technology that intercepts IP packets and redirects those packets
to a destination other than that specified in the IP packet. Typically the packets are redirected from their
destination web server on the Internet to a content engine that is local to the client. In some WCCP deployment
scenarios, redirection of traffic may also be required from the web server to the client. WCCP enables you
to integrate content engines into your network infrastructure.
Multiple routers can use WCCPv2 to service a content engine cluster. In WCCPv1, only one router can
redirect content requests to a cluster.
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Finding Feature Information, page 89
Prerequisites for WCCPv2—IPv6 Support, page 90
Restrictions for WCCPv2—IPv6 Support, page 90
Information About WCCPv2—IPv6 Support, page 90
How to Configure WCCPv2—IPv6 Support, page 101
Configuration Examples for WCCPv2—IPv6 Support, page 111
Additional References, page 116
Feature Information for WCCPv2—IPv6 Support, page 116
Bug Search Tool
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
C H A P T E R
and the release notes for your platform and software release. To
4
89