Cisco ASR 1000 Series Configuration Manual page 80

Enabling the WCCP Outbound ACL Check
SUMMARY STEPS
1. enable
2. configure terminal
3. ip wccp [vrf vrf-name] {web-cache | service-number} [group-address multicast-address] [redirect-list
access-list] [group-list access-list] [password password]
4. ip wccp check acl outbound
5. exit
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3 ip wccp [vrf vrf-name] {web-cache | service-number}
[group-address multicast-address] [redirect-list
access-list] [group-list access-list] [password
password]
Example:
Device(config)# ip wccp web-cache
Step 4
ip wccp check acl outbound
Example:
Device(config)# ip wccp check acl outbound
Step 5 exit
Example:
Device(config)# exit
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
72
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enables the support for a Cisco content engine service group
or any content engine service group and configures a redirect
ACL list or group ACL.
Note The web-cache keyword is for WCCP version 1 and
version 2 and the service-number argument is for
WCCP version 2 only.
Checks the access control list (ACL) for egress interfaces for
packets redirected by WCCP.
Exits global configuration.
Configuring WCCP