Cisco ASR 1000 Series Configuration Manual page 122

Example: WCCPv2—IPv6—Verifying WCCP Settings
ipv6 wccp 99 redirect in
no ip route-cache
no ip mroute-cache
!
interface Serial0
no ip address
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
shutdown
!
interface Serial1
no ip address
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
shutdown
!
ip default-gateway 10.3.1.1
ip classless
ip route 0.0.0.0 0.0.0.0 10.3.1.1
no ip http server
!
!
!
line con 0
transport input none
line aux 0
transport input all
line vty 0 4
password password1
login
!
end
The following example shows how to display global statistics related to WCCP:
Device# show ipv6 wccp web-cache detail
WCCP Client information:
WCCP Client ID:
Protocol Version:
State:
Redirection:
Packet Return:
Packets Redirected:
Connect Time:
Assignment:
Mask SrcAddr
---- -------
0000: 0x00000000 0x00001741 0x0000
Value SrcAddr
----- -------
0000: 0x00000000 0x00000000 0x0000 0x0000 0x3C010102 (10.1.1.2)
0001: 0x00000000 0x00000001 0x0000 0x0000 0x3C010102 (10.1.1.2)
0002: 0x00000000 0x00000040 0x0000 0x0000 0x3C010102 (10.1.1.2)
0003: 0x00000000 0x00000041 0x0000 0x0000 0x3C010102 (10.1.1.2)
0004: 0x00000000 0x00000100 0x0000 0x0000 0x3C010102 (10.1.1.2)
0005: 0x00000000 0x00000101 0x0000 0x0000 0x3C010102 (10.1.1.2)
0006: 0x00000000 0x00000140 0x0000 0x0000 0x3C010102 (10.1.1.2)
For more information about the show ip wccp web-cache command, see the Cisco IOS IP Application Services
Command Reference document.
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
114
10.1.1.2
2.0
Usable
L2
L2
0
00:20:34
MASK
DstAddr SrcPort DstPort
------- ------- -------
0x0000
DstAddr SrcPort DstPort CE-IP
------- ------- ------- -----
WCCPv2—IPv6 Support