Verifying And Monitoring Wccpv2—Ipv6 Configuration Settings - Cisco ASR 1000 Series Configuration Manual

Verifying and Monitoring WCCPv2—IPv6 Configuration Settings
Verifying and Monitoring WCCPv2—IPv6 Configuration Settings
SUMMARY STEPS
1. enable
2. show ipv6 wccp [ vrf vrf-name] [service-number | web-cache] [detail | view]
3. show ipv6 interface
4. more system:running-config
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
show ipv6 wccp [ vrf vrf-name]
[service-number | web-cache] [detail |
view]
Example:
Device# show ipv6 wccp 24 detail
Step 3 show ipv6 interface
Example:
Device# show ipv6 interface
Step 4
more system:running-config
Example:
Device# more
system:running-config
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
110
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
(Optional) Displays global information related to WCCP, including the protocol
version currently running, the number of content engines in the router service
group, which content engine group is allowed to connect to the router, and which
access list is being used. The argument and keywords are as follows:
• service-number—(Optional) Dynamic number of the web-cache service
group being controlled by the content engine. The range is from 0 to 99.
For web caches that use Cisco Content Engines, the reverse proxy service
is indicated by a value of 99.
• web-cache—(Optional) Statistics for the web-cache service.
• detail—(Optional) Other members of a particular service group or web
cache that have or have not been detected.
• view—(Optional) Information about a router or all web caches.
(Optional) Displays status about whether any ip wccp redirection commands
are configured on an interface; for example, "Web Cache Redirect is enabled /
disabled."
(Optional) Displays contents of the currently running configuration file
(equivalent to the show running-config command).
WCCPv2—IPv6 Support