Port-Shaper And Llq In The Presence Of Efps; Finding Feature Information; Restrictions For Port-Shaper And Llq In The Presence Of Efps - Cisco ASR 920 Series Configuration Manual

Port-Shaper and LLQ in the Presence of EFPs

The Port-Shaper and LLQ in the Presence of EFPs feature allows network designers to configure port and
class policies on ports that contain Ethernet Flow Points (EFPs). These policies support Low Latency Queueing
(LLQ) and traffic prioritization across the EFPs.
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Restrictions for Port-Shaper and LLQ in the Presence of EFPs

• If you configure a class-based policy on the port, then you cannot configure service-policies on Ethernet
• Attaching a service policy to the BDI is not supported.
• ACL based shaping policy-map cannot be applied to the EFP and/or egress interface.
Finding Feature Information, page 17
Restrictions for Port-Shaper and LLQ in the Presence of EFPs, page 17
Information About Port-Shaper and LLQ in the Presence of EFPs, page 18
How to Configure Port-Shaper and LLQ in the Presence of EFPs, page 18
Configuration Examples for Port-Shaper and LLQ in the Presence of EFPs, page 26
Additional References, page 27
Feature Information for Port-Shaper and LLQ in the Presence of EFPs, page 28
Bug Search Tool
Flow Points (EFPs).
C H A P T E R
and the release notes for your platform and software release. To
QoS: Policing and Shaping Configuration Guide (Cisco ASR 920 Series)
3
17