Cisco ASR 1000 Series Configuration Manual page 29

Configuring IP Services
Feature Name
IP Precedence Accounting
Show and Clear Commands for
IOS Sockets
Releases
12.2(21) 12.1(27b)E1 12.1(5)T15
12.2(25)S 12.2(33)SRA
12.2(18)SXF13 12.2(33)SXH1
15.0(1)S
12.4(11)T
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
Feature Information for IP Services
Feature Information
The IP Precedence Accounting
feature provides accounting
information for IP traffic based on
the precedence of any interface.
This feature calculates the total
packet and byte counts for an
interface that receives or sends IP
packets and sorts the results based
on the IP precedence. This feature
is supported on all interfaces and
subinterfaces and supports CEF,
dCEF, flow, and optimum
switching.
The following command was
introduced by this feature: show
interface precedence, ip
accounting precedence.
The Show and Clear Commands
for IOS Sockets feature introduces
the show udp, show sockets, and
clear socketscommands. These
new commands are useful for
monitoring and managing the Cisco
IOS Socket library.
The following commands were
introduced or modified by this
feature: clear sockets, show
sockets,show udp.
The following command was
replaced by this feature:show ip
sockets.
21