Configuring IP Accounting
SUMMARY STEPS
1. enable
2. configure terminal
3. interface type/number/slot
4. ip mtu bytes
5. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
interface type/number/slot
Example:
Device(config)# interface GigabitEthernet 0/0/0
Step 4
ip mtu bytes
Example:
Device(config-if)# ip mtu 300
Step 5
end
Example:
Device(config-if)# end
Configuring IP Accounting
To configure IP accounting, perform this task for each interface.
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
10
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Specifies the interface to configure and enters interface
configuration mode.
Sets the IP MTU packet size for an interface.
Returns to privileged EXEC mode.
Configuring IP Services