Configuring TCP
Configuring Keepalive Parameters
SUMMARY STEPS
1. enable
2. configure terminal
3. ip tcp keepalive interval seconds
4. ip tcp keepalive retries number-of-retries
5. end
6. show running-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
ip tcp keepalive interval seconds
Example:
Device(config)# ip tcp keepalive interval 23
Step 4
ip tcp keepalive retries number-of-retries
Example:
Device(config)# ip tcp keepalive retries 5
Step 5
end
Example:
Device(config)# end
Step 6
show running-config
Example:
Device# show running-config
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
Configuring Keepalive Parameters
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enables global configuration mode.
Configures the keepalive interval.
Configures the number of unacknowledged probes that
can be sent before declaring the connection as dead.
Exits global configuration mode.
(Optional) Displays the running configuration.
37