Configuring Closed Services - Cisco ASR 1000 Series Configuration Manual

Configuring Closed Services

Command or Action
Step 8
ip wccp redirect exclude in
Example:
Device(config-if)# ip wccp redirect exclude
in
Configuring Closed Services
Perform this task to specify the number of service groups for WCCP, to configure a service group as a closed
or open service, and to optionally specify a check of all services.
SUMMARY STEPS
1. enable
2. configure terminal
3. Enter one of the following commands:
4. ip wccp check services all
5. ip wccp [vrf vrf-name ] {web-cache | service-number}
6. exit
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3 Enter one of the following commands:
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
66
• ip wccp [vrf vrf-name] service-number [service-list service-access-list mode {open | closed}]
• or
• ip wccp [vrf vrf-name] web-cache mode {open | closed}
Purpose
(Optional) Excludes traffic on the specified interface from
redirection.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Configures a dynamic WCCP service as closed or open.
Configuring WCCP