Disabling The Command History Feature; Using Editing Features; Enabling And Disabling Editing Features - Cisco Catalyst 2360 Software Configuration Manual

Chapter 2 Using the Command-Line Interface

Disabling the Command History Feature

The command history feature is automatically enabled. You can disable it for the current terminal
session or for the command line. These procedures are optional.
To disable the feature during the current terminal session, enter the terminal no history privileged
EXEC command.
To disable command history for the line, enter the no history line configuration command.

Using Editing Features

This section describes the editing features that can help you manipulate the command line. It contains
these sections:
•
•
•

Enabling and Disabling Editing Features

Although enhanced editing mode is automatically enabled, you can disable it, re-enable it, or configure
a specific line to have enhanced editing. These procedures are optional.
To globally disable enhanced editing mode, enter this command in line configuration mode:
Switch (config-line)# no editing
To re-enable the enhanced editing mode for the current terminal session, enter this command in
privileged EXEC mode:
Switch# terminal editing
To reconfigure a specific line to have enhanced editing mode, enter this command in line configuration
mode:
Switch(config-line)# editing
OL-19808-01
Enabling and Disabling Editing Features, page 2-7
Editing Commands through Keystrokes, page 2-8
Editing Command Lines that Wrap, page 2-9
(optional)
(optional)
(optional)
Catalyst 2360 Switch Software Configuration Guide
Using Editing Features
2-7