Cisco Catalyst 2360 Software Configuration Manual page 516

Working with Software Images
Command
Step 5
end
Step 6 archive upload-sw
rcp:[[[//[username@]location]/directory]/image-na
me.tar]
The archive upload-sw privileged EXEC command builds an image file on the server by uploading
these files in order: info, the Cisco IOS image, and the web management files. After these files are
uploaded, the upload algorithm creates the file format.
For the download and upload algorithms to operate properly, do not rename image names.
Caution
Catalyst 2360 Switch Software Configuration Guide
B-38
Chapter B Working with the Cisco IOS File System, Configuration Files, and Software Images
Purpose
Return to privileged EXEC mode.
Upload the currently running switch image to the RCP
server.
• For //username, specify the username; for the RCP copy
request to execute, define an account on the network
server for the remote username. For more information,
see the
File By Using RCP" section on page
For @location, specify the IP address of the RCP
•
server.
For /directory]/image-name.tar, specify the directory
•
(optional) and the name of the software image to be
uploaded. Directory and image names are case
sensitive.
• The image-name.tar is the name of software image to
be stored on the server.
"Preparing to Download or Upload an Image
B-34.
OL-19808-01