Cisco Catalyst 2360 Software Configuration Manual page 513

Chapter B Working with the Cisco IOS File System, Configuration Files, and Software Images
For more information, see the documentation for your RCP server.
Downloading an Image File By Using RCP
You can download a new image file and replace or keep the current image.
Beginning in privileged EXEC mode, follow Steps 1 through 6 to download a new image from an RCP
server and overwrite the existing image. To keep the current image, go to Step 6.
Command
Step 1 —
Step 2 —
Step 3 configure terminal
Step 4 ip rcmd remote-username username
Step 5
end
OL-19808-01
If the switch IP address translates to Switch1.company.com, the .rhosts file for User0 on the RCP
server should contain this line:
Switch1.company.com Switch1
Purpose
Verify that the RCP server is properly configured by
referring to the "Preparing to Download or Upload an Image
File By Using RCP" section on page
Log into the switch through the console port, the Ethernet
management port, or a Telnet session.
Enter global configuration mode.
This step is required only if you override the default remote
username (see Steps 4 and 5).
(Optional) Specify the remote username.
Return to privileged EXEC mode.
Catalyst 2360 Switch Software Configuration Guide
Working with Software Images
B-34.
B-35